Vijay Kumar Srivastava  is a Professor, Indian Institute of Technology,India

Vijay Kumar Srivastava


Organizing Committee


Indian Institute of Technology


1. V.K. Srivastava and P.S. Shembekar, Tensile and Fracture Properties of Epoxy Resin Filled with Fly Ash Particles, J. MATERIALS SCIENCE, 25, 3513−3516 (1990).[I.F.=2.59, Citation-91 ]. Springer Pub UK. 

2. V.K. Srivastava, J.P. Pathak and K. Tahzibi, Wear and Friction Characteristics of Mica Filled Fibre Reinforced Epoxy Resin Composites, WEAR, 152, 2, 343−350 (1992). [I.F.=2.798, Citation-29], Elsevier Pub, UK.

3. V.K. Srivastava and J.P. Pathak, Friction and Wear Properties of Bushing Bearing of Graphite Filled Short Glass Fibre Composites in Dry Sliding, WEAR, 197, 1-2, 145−150 (1996). ).[I.F.=2.798, Citation-54], Elsevier Pub, UK.

4. V.K. Srivastava and P.J. Hogg, Moisture Effects on the Toughness, Mode−I and Mode−II of Particles Filled Quasi−Isotropic Glass−Fibre−Reinforced Polyester Resin Composites, J. MATERIALS SCIENCE, 33, 5, 1129−1136 (1998) [I.F.=2.45, Citation-45], Springer Pub, UK.

5. H. Kawada and V.K. Srivastava, The Effect of an Acidic Stress Environment on the Stress–Intensity Factor for GRP Laminates, COMPOSITES SCIENCE AND TECHNOLOGY, 61, 8, 1109−1114 (2001). [I.F.=3.34, Citation-36], Elsevier Pub, UK.

6. V.K. Srivastava and H. Kawada, Fatigue Behaviour of Alumina – Fibre – Reinforced Epoxy Resin Composite Pipes Under Tensile and Compressive Loading Conditions, COMPOSITES SCIENCE AND TECHNOLOGY, 61, 16, 2393−2403 (2001). [I.F.=3.34. Citation-43], Elsevier Pub, UK.  

7. V.K. Srivastava, Notched Strength Prediction of Laminated Composite Under Tensile Loading, MATERIALS SCIENCE AND ENGINEERING − A, 328, 1-2, 302−309 (2002). [I.F.=2.226, Citation-23], Elsevier Pub, UK.

8. V.K. Srivastava, Characterization of Adhesive Bonded Lap Joints of C/C−SiC and Ti−6Al−4V Alloy Under Varying Conditions, INT. J.  ADHESION & ADHESIVES, 23, 1, 59−67 (2003). [I.F.= 2.418, Citation-53], Elsevier Pub, UK.

9. V. K. Srivastava and A. G. Pawar, Solid Particle Erosion of Glass Fibre Reinforced Flyash Filled Epoxy Resin Composites, COMPOSITE SCIENCE & TECHNOLOGY., 66, 3021-3028 (2006). [I.F.=3.34, Citation- 110], Elsevier Pub, UK.

10. V. K. Srivastava, Effects of Wheat Starch on Erosive Wear of E-glass Fibre Reinforced Epoxy Resin Composites, MATERIALS SCIENCE & ENGG. – A, 435-436, 282-287 (2006). [I.F.=2.226, Citation-52], Elsevier Pub, UK.

11. D. Upadhyay, M. A. Panchal, R.S. Dubey and V. K. Srivastava, Corrosion of Alloys used in Dentistry: A Review, MATERIALS SCIENCE & ENGG. - A, 432, 1-11 (2006). [I.F.=2.226, Citation-125]. Elsevier Pub, UK.

12. V. K. Srivastava, A. Rastogi, S.C. Goel, and S.K. Chukowry, Implantation of Tricalcium Phosphate−Polyvinyl Alcohol Filled Carbon Fibre Reinforced Polyester Resin Composites into Bone Marrow of Rabbits, MATERIALS SCIENCE & ENGG. –A, 448, 1-2, 335-339 (2007). [I.F.=2.226, Citation-17], Elsevier Pub, UK.

13. V. K. Srivastava and S. Wahne, Wear and Friction Behaviour of Soft Particles Filled Random Direction Short GFRP Composites, MATERIALS SCIENCE & ENGG. - A, 458, 1-2, 25-33 (2007). [I.F.=2.226, Citation-36], Elsevier Pub, UK.

14. V. K. Srivastava, Effect of Carbon Nanotubes on the Strength of Adhesive Lap Joints of C/C and C/CSiC Ceramic Fibre Composites, Int J Adhes Adhe, Vol. 31, (2011), 486-489. [I.F.= 2.418, Citation55] (doi:10.1016/j.ijadhadh.2011.03.006), Elsevier Pub, UK.

15. V. K. Srivastava, Modeling and Mechanical Performance of Carbon Nanotube / Epoxy Resin Composites, Mater Des, 39, (2012), 432-435. [I.F.= 3.626, Citation-57] (doi:10.1016/j..matdes.2012.02.039). Elsevier, Pub, UK.

16. A. Mohanty and V.K. Srivastava, Dielectric Breakdown Performance of Alumina/Epoxy Resin Nano Composites Under High Voltage Application, MATERIALS & DESIGN, 47, 711-716 (2013) [I.F. =2.20, Citation-21], Elsevier Pub, UK.

17. V. K. Srivastava and W. Krenkel, Characterization of Silicon-Silicon Carbide Ceramic Derived from Carbon-Carbon Silicon Carbide Composites, INT. J. OF MATERIALS RESEARCH, Vol. 104, 4, 398-402 (2013) [I.F.= 1.18, Citation-11], Hanser Pub, Germany.

18. S. Singh, V.K. Srivastava and R. Prakash, Characterization of Multi-Walled Carbon Nanotube Reinforced Epoxy Resin Composites, MATERIALS SCIENCE & TECHNOLOGY, Vol.29, 9, 11301134 (2013) [I.F.=0.85, Citation-14], Elsevier Pub, UK.

19. A. Mohanty, V.K. Srivastava and P.U. Sastry, Investigation of Mechanical Properties of Alumina Nanoparticle Loaded Hybrid Glass/Carbon Fibre Reinforced Epoxy Composites, J. OF APPL. POLYMER SCIENCE, Vol. 131, 1, 1-7 (Jan 2014). [I.F.= 1.289, Citation-25]. Wiley Pub, UK. 

20. J. Azadmanjiri, C. C. Berndt, J. Wang, A. Kapoor, V. K. Srivastava and C. Wen, A Review on Hybrid Nanolaminate Materials Synthesized by Deposition Techniques for Energy Storage applications, J Mater Chem A, RSC, 2, (2014), 3695-3708. [I.F.= 6.101, Citation-41] (DOI:10.1039/C3TA 140348).

21. S. Singh, V. K. Srivastava and R. Prakash, Influences of carbon nanofillers on mechanical performance of epoxy resin polymer, APPLIED NANOSCIENCE, Springer Press, Vol. 5, 305-313 (2015). [I.F.=0.78, Citation-17].

22. A. Mohanty and V. K. Srivastava, Tribological Behaviour of Particles and Fibres Reinforced Hybrid Nanocomposites, TRIBOLOGY TRANSACTIONS, Taylor & Francis Pub., 58, 1142-1150 (2015)  [I.F. = 1.081, Citation-17].

23. A. Mohanty and V. K. Srivastava, Effect of Alumina Nanoparticles on the Enhancement of Impact and Flexural Properties of the Short Glass/Carbon Fibre Reinforced Epoxy Based Composites, FIBRES AND POLYMERS, Springer Press UK, Vol. 16, 1, 188-195 (2015). [I.F.= 1.113, Citation-21].

24. J. Azadmanjiri, P. Wang, H. Pingle, P. Kingshott, J. Wang, V.K. Srivastava and A. Kapoor, Enhanced Attachment of Human Mesenchymal Stem Cells on Nanograined Titania Surfaces, RSC ADVANCES, 6, 55825-55833 (2016), DOI: 10.1039/C6RA10289A. [I.F.= 3.289, Citation-7].

25. J. Azadmanjiri, C. C. Berndt, J. Wang, A. Kapoor and V. K. Srivastava, Nanolaminated Composite Materials: Structure, Interface Role and Applications. RSC ADVANCES, 6 (111) (2016), 109354109360.DOI: 10.1039/C6RA20050H [I.F. = 3.289, Citation-6].

26. Azadmanjiri, Jalal; Wang, James; Berndt, Christopher; Kapoor, Ajay; Zhu, De Ming ; Ang, Andrew; V.K. Srivastava, Tantalum- and Silver-Doped Titanium Dioxide Nanosheets Film: Influence on Interfacial Bonding Structure and Hardness of the Surface System, Journal OF INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, ACS Publication, 56 (2017)434-439. [I.F.=2.567, Citation-6] DOI: 10.1021/acs.iecr.6b03557.

27. V. K. Srivastava, P. Alessandro, N. Zamperlin and B. Fox, Effect of Carbonization and Multi-Walled Carbon Nanotubes on Polyacrylonitrile Short Carbon Fibre - Epoxy Composites, POLYMER COMPOSITES, 2016, .[I.F.=2.234, Citation-116]. Wiley Pub, UK.

28. J. Azadmanjiri, C. C. Berndt, J. Wang, A. Kapoor and V. K. Srivastava, Structural and Mechanical Properties of Magnetron Sputtered Al-Au Thin Films, Journal of APPLIED PHYSICS-A, MATERIALS SCIENCE & ENGINEERING, Vol. 123 (1), (2017) 123-71. Springer Pub, UK. [I.F. = 1.44, Citation-6] DOI: 10.1007/s00339-016-0708-1.

29. J. Azadmanjiri, J. Wang, C. C. Berndt, A. Kapoor, D. M. Zhu, A. S. S.M. Ang and V. K. Srivastava, Influence of charged defects on the interfacial bonding strength of tantalum- and silver-doped nanograined TiO2. RSC, Phys. Chem. Chem. Phys (PCCP),19 (19), April (2017) 11881-11891.[I.F. = 4.495, Citation-5] DOI: 10.1039/C7CP02000G.

30. V.K. Srivastava, Thomas Gries, Dieter Veit, Till Quadflieg, Benjamin Mohr and Martin Kolloch, Effect of Nanomaterial on Mode I and Mode II Interlaminar Fracture Toughness of Woven Carbon Fabric Reinforced Polymer Composites, ENGINEERING FRACTURE MECHANICS, Elsevier Ltd., UK, 180, 73-86 (2017) [I.F. = 2.24], Citation-6.

31. P.Kumar and V. K. Srivastava, Reciprocating Sliding Tribology of Ceramic Fiber Composites with Variation of Laminate Orientation and Surface Conformity, CERAMIC INTERNATIONAL, Elsevier Ltd. UK, 44 (2018) 5365-5370. [I.F.= 2.34, Citation-1].

32. J. Azadmanjiri, V. K. Srivastava, P. Kumar, M. Nikzad, James Wang and Aimin Yu, Two- and ThreeDimensional Graphene-based Hybrid Composites for Advanced Energy Storage and Conversion Devices, RSC, JOURNAL OF MATERIALS CHEMISTRY-A, , 6 (2018), 702-734. DOI: 10.1030/C7TAO8748A. [I.F.= 8.8674, Citation-4].


  • 1973-1977 Gorakhpur University, India  B.E. (Mechanical Engineering)
  • 1977-1979 Institute of Technology, BHU, India M.Tech. (Machine Design)
  • 1983-1987 Institute of Technology, BHU, India PhD (Nondestructive Evaluation of  Composites)  
  • 1992-1993 University of Bath, UK   PDF (Toughness of Fibre Composites)
  • 1996-1997 QMW University of London, UK  PDF (Fibre Composite Materials)
  • 2003-2004 University of Stuttgart, Germany  PDF (Ceramic Fibre Composites) 


  • Fellow, Institution of Engineers, India, (2004).
  • Boyscast Fellowship, DST, India (1991-92).
  • European Community Fellowship, Belgium, (1992-93).
  • Commonwealth Academic Staff Fellowship, British Council, UK, (1996-97).  
  • DFG, BONN, Germany− INSA, India Fellowship,  (1997-98).
  • Founder President, ICRACM International Conference, (2004).
  • JSPS, Japan − INSA, India Fellowship, (2000).
  • ROYAL SOCIETY, United Kingdom – INSA, India Fellowship,  (2004-05).
  • Visiting Professor Fellowship, University of Bordeaux, Bordeaux, France, (2007).
  • ERASMUS MUNDUS Fellowship, European Community, Belgium, (2009).
  • WINDOW ON SCIENCE Fellowship, AOARD-AFOSR, USA, (2010).
  • Visiting Professor Fellowship, University of Cagliari, Cagliari, Italy, (2010).
  • DFG, BONN, Germany-INSA, India Fellowship,  (2012).  
  • Visiting Professor Fellowship, Ecole Des Mines De Douai, Douai, France, (2012).
  • Visiting Academic Professor Fellowship, Masaryk University, Brno, Czech Republic, (2013).
  • Visiting Academic Professor Fellowship, IMF, Deakin University, Geelong, Australia, (2014)
  • Bharat Gaurav Award, India International Friendship Society, India, (2014).
  • Visiting Academic Professor Fellowship, University of Trento, Italy, (2015). 
  • DFG, BONN, Germany – INSA, India Fellowship,  (2016).

Upcoming Conferences