BROCHURE
Ravindra Jilte is a Professor,Lovely Professional University,India

Ravindra Jilte

Professor

Organizing Committee

India

Lovely Professional University

Publications

International Journal

R. D. Jilte, Ravinder Kumar, Mohammad H. Ahmadi, 2019, “Cooling Performance of Nanofluid submerged vs. Nanofluid Circulated Battery Thermal Management Systems”, Journal of Cleaner Production, SCI indexed, Impact Factor  6.394

R. D. Jilte, Ravinder Kumar, Mohammad H. Ahmadi, 2019, “Battery thermal management system employing phase change material with cell-to-cell air cooling”, Applied Thermal Engineering, SCI indexed, Impact Factor 4.04

Ravinder Kumar, Ravindra Jilte, Keval Chandrakant Nikam,Mohammad Hossein Ahmadi,2019, “Status of carbon capture and storage in India’s coal fired power plants: A critical review”, Environmental Technology & Innovation, SCI indexed, Impact Factor 2.8

Rohit Duhhal, R.D.Jilte, 2019, “Numerical analysis of synthetic fluids in three-dimensional trapezoidal cavity used for CLFR plant,” Material Today Proceedings Scopus indexed, SJR 0.312

Mahmood Chahartaghi, Mohammad Kalami, Mohammad H. Ahmadi, R. D. Jilte, 2019,  “Energy and exergy analyses and thermo-economic optimization of geothermal heat pump for domestic water heating”, International Journal of Low-Carbon Technologies, SCI indexed, Impact Factor 1.054

Mohammad Hossein Ahmadi, Behnam Mohseni-Gharyehsafa, MahmoodFarzaneh-Gord, R. D. Jilte, Ravinder Kumar & Kwok-wing Chau, 2019, “Applicability of connectionist methods to predict dynamic viscosity of Ag/water nanofluid by using ANN-MLP, MARS and MPR algorithms”, Engineering Applications of Computational Fluid Mechanics, SCI indexed, Impact Factor 1.379

Ravinder Kumar, Ravindra Jilte, Mohammad H Ahmadi, Rajneesh Kaushal, 2019. “A simulation model for thermal performance prediction of a coal-fired power plant”, International Journal of Low-Carbon Technologies, SCI indexed, Impact Factor 1.054

Mohammad Ahmadi, Raviner kumar, R.D.Jilte, 2019,” Applications of nanofluids in geothermal: A review” Mathematical Modelling of Engineering Problems, scopus indexed

Mohammad Ahmadi, Raviner kumar, R.D.Jilte, 2019,” A review on the solar applications of thermosyphons” Mathematical Modelling of Engineering Problems, scopus indexed

Mohammad Ahmadi, Raviner kumar, R.D.Jilte, 2019,” Technical and economical optimization of CHP systems by using gas turbine and energy recovery system” Mathematical Modelling of Engineering Problems, scopus indexed

R.D. Jilte, Lin Ma, Ravinder Kumar, 2018, “Thermal Performance of a Novel Confined Flow Li-ion Battery Module”, Applied Thermal Engineering SCI indexed- Impact Factor  4.04

R.D. Jilte, Lin Ma, Ravinder Kumar, 2018, “Numerical investigation on cooling performance of Li-ion battery thermal management system at high galvanostatic discharge”, Engineering Science and Technology, an International Journal scopus indexed SJR 0.765

R.D. Jilte, Ravinder Kumar, 2019,  “Study on non-reactive multiphase cold model of fluidized bed gasifier”, Applied science letters, accepted. Scopus indexed, CPCI

R.D.Jilte, Ravinder Kumar, Mohammad Ahmadi, 2019, “Study on novel concentric multi channel heat sink with Al2O3-water nanofluid”, Journal of thermophyics and Heat transfer, submitted, Scopus indexed.

Ravinder Kumar, R.D. Jilte, 2019 “Steady state modeling and validation of a sub critical coal fired power plant, © Springer Nature Singapore Pte Ltd. 2019 P. Saha et al. (eds.), Advances in Fluid and Thermal Engineering, Lecture Notes in Mechanical Engineering, Scopus indexed

Ravinder Kumar, R.D. Jilte, Mohammad Ahmadi, 2018, “Electricity alternative for e-rickshaws: An approach towards green city”, International Journal of Intelligent Enterprise,  Scopus indexed

R.D. Jilte, Ravinder Kumar, 2018,  Thermal Stress Analysis of XW-42 Steel Workpiece Using Finite Element Modeling, Material Today Proceedings Scopus indexed, SJR 0.312

Ravinder Kumar, R.D. Jilte, 2018, Temperature Distribution of a Workpiece in EDM Process, Material Today Proceedings Scopus indexed, SJR 0.312

R.D. Jilte, S.B. Kedare and J.K. Nayak, 2017, “Experimental investigation on heat losses from differentially heated cylindrical cavity receiver used in paraboloid concentrator” ASME Journal of Solar Energy Engineering. 139 (3). SCI indexed impact factor 1.91

Rohit Duggal, RD Jilte, 2017, “Numerical Investigation on Trapezoidal Cavity Receiver Used in LFR with Water Flow in Absorber Tubes”, IOP Conference Series: Materials Science and Engineering, Scopus indexed

Rohit Duggal, RD Jilte, 2017, “Study on heat loss characteristics of staggered and aligned absorber tubes”, International Journal of Mechanical Engineering and Technology (IJMET), Scopus indexed

Rohit Duggal, RD Jilte, 2017, “Study on thermal performance of different heat transfer fluids used in absorber tubes of a CLFR power plant”, International Journal of Mechanical Engineering and Technology (IJMET), Scopus indexed

Jijo Mathew, R.D.Jilte, 2017, “Experimental study on wetting surface with different patterns used for carbon capture”. International Journal of Control Theory and applications, Scopus indexed

R.D. Jilte, Bhanukiran,2017, “Experimental study on cooling performance of spiral minichannel heat sink”, ”, International journal of Engineering, International Journal of Control Theory and application, Scopus indexed

BVVarmaa and RDJilte,2017, “Optimization of Materials and Refrigerants for Fin Tube Air Cooled Condenser Used in AC, Scopus indexed

R.D. Jilte, S.B. Kedare and J.K. Nayak, 2014, “Investigation on convective heat losses from solar cavities under wind conditions” Elsevier Journal Energy Procedia Vo-57, pp 437-446, Scopus indexed

R.D. Jilte, S.B. Kedare and J.K. Nayak, 2013, “Natural convection and radiation heat loss from open cavities of different shapes and sizes used with solar concentrator”, Mechanical Engineering Research, Vol. 3, No.1,  pp 25-43

R.D. Jilte, S.B. Kedare and J.K. Nayak, 2012, “Comparision of cavity receivers with and without mouth-blockage of different shapes and sizes used in paraboloid dish applications”, Journal of Fundamentals of Renewable Energy and Applications, Vol.2,  pp 1-6.

A.J. Chaudhari, V.D. Patel and R. D. Jilte, 2012, “Design and Experimental performance evaluation of heat exchanger installed to recover heat from chimney to supply dry and hot air required in a  bread/biscuit processes”, International Journal of Engineering Research and Applications,  pp 84-89.

V.D.Patel, A.J. Chaudhari and R.D. Jilte, 2012, “Theoretical and Experimental evaluation of vapour absorption refrigeration system”, International Journal of Engineering Research and Applications,  pp 128-131.

International Conferences

R.D. Jilte, S.B. Kedare and J.K. Nayak, “Investigation on convective heat losses from solar cavities under wind conditions”, ISES Solar World Congress, November 3-7, 2013, Cancun, Mexico.

R.D. Jilte, S.B. Kedare and J.K. Nayak, 2012, “Comparision of cavity receivers with and without mouth-blockage of different shapes and sizes used in paraboloid dish applications”, International conference on Energy Security, Global warming and sustainable climate (Solaris 2012), 7-9 February 2012, BHU Varanasi, India.

R.D. Jilte, S.B. Kedare and J.K. Nayak, 2011, “Determination of stagnation and convective zones inside an inclined cylindrical cavity”, Proceedings of the 21st National and 10th International ISHMT-ASME Heat and Mass Transfer conference, December 27-30, 2011, IIT Madras, India.

R.D. Jilte, S.B. Kedare and J.K. Nayak, 2011, “Convective loss of solar cavity receivers under windy conditions”, , International Conference on Advances in Energy Research (ICAER 2011), IIT Bombay, India. 9-11 December 2011.

A. J. Choudhari, V. R. Kalamkar and R.D. Jilte, “Experimental Evaluation and Model Analysis of FlowSurfer and Proposing the Specification for the Prototype Upto 100kg. Weight of Person”, at International Conference on Advances in Mechanical Engineering (ICAME 2009), June 24-25 2009, Universiti Teknologi Mara, Malaysia.

R.D. Jilte, A.B.Datye, A.J. Chaudhari and V.D.Patel, 2007, “Design and performance analysis of solar dryer for banana slices using Scheffler dish and its comparison with electrical food drier”,  International Conference on Advances in Energy Research (ICAER 2007), IIT Bombay, India. 12-14 December 2007.

R.D. Jilte, Dr.A.B.Datye and A.J.Chaudhari, “Design and Experimental Evaluation of fuel efficient heat pipe petrol engine. International Conference on Biofuel Vision 2015, Govt. College of Engg, Bikaner Oct 13-15, 2006.

R.D. Jilte, Dr.A.B.Datye and V.D.Patel “ Performance analysis of Diesel engine operating on blends of karanji oil and soybean oil with Diesel. International Conference on Biofuel Vision 2015, Govt. College of Engg, Bikaner Oct 13-15, 2006.

Education

2014.........Ph.D. - I.I.T. Bombay - Energy Science and Engineering

2000.........M.Tech. - I.I.T. Madras - Thermal Engineering

1998..........B.E. - Nagpur University - Mechanical Engineering