BROCHURE

Nima Amanifard

Professor

Organizing Committee

Iran

University of Guilan

Publications

Journal Papers:

1-A. Heydari, N. Amanifard ,M.Golafshani,"A composite finite difference scheme for subsonic/Transonic Flows "International Journal of Engineering,Vol.10,No.1,Feb.1997.  

2-Fahanieh B , Amanifard N, “ Numerical Investigation on Compressible Flow Characteristics in Axial Compressors Using a Multi-Block Finite-volume Scheme ”, International Journal of Engineering . , Vol.15, No.1, 2002, pp. 91-104 .  

3-Fahanieh B, Amanifard N., and Ghorbanian k., “ A Numerical Comparison of 2-D Inviscid and Viscous Approaches for Flow Through a Stage of an Axial Compressor ”, Scientia Iranica Journal , Vol.11, Nos. 1&2  , April 2004 ,pp. 128-137 .  

4-Bijan Farhanieh ,Nima Amanifard and Kaveh Ghorbanian,”A 2-D Numerical Investigation on the Modal Characteristics of Rotating-Stall with a Variable-Cascade-length Approach in an Axial Compressor ,”International Journal of Engineering , Vol. 15 No.1 Feb .2002 ,pp. 91-104.  

5-Bijan Farhanieh ,Nima Amanifard and ,Kaveh Ghorbanian, "A Numerical Investigation on the Unstable Flow in a Single Stage of an Axial Compressor , ”International Journal of Engineering,Vol.16,No.2,June 2003 ,pp171-182.

6-Nima Amanifard,"Stall Vortex Shedding over a Compressor Cascade ," International Journal of Engineering,Vol. 18, No. 1, Feb. 2005, pp. 9.

7-Nima Amanifard and A.K. Haghi",Effects of some Variable Parameters on Convective Drying of Synthetic Leather ," International journal of Heat  & Technology , Vol.24,No.1,2006  

8-N. Amanifard ,N. Nariman-zadeh, A. Jamali, M.H .Farahani, R. Farzaneh-kari" ,Multi-Objective Pareto Optimization of Axial Compressors Using Genetic Algorithms, "J. of WSEAS Transactions on Computers, July 2006 ,ID. 534-592.  

9-A. Bagheri,N. Amanifard,T. Karimi,M.H. Farahani " , Adaptive Nueral Network Control of an Underwater Remotely Operated Vehicle ROV, "J. of WSEAS Transactions on Computers, Jul. 2006, ID. 534-592.

10-Nima Amanifard and A.K. Haghi",Numercal Analysis of Fluid Flow and Heat Transfer in Microchannels ," International journal of Heat  & Technology ,Vol. 25-1,Jun. 2007.

11-M. Naghashzadegan, A.K. Haghi ,N. Amanifard,Sh .Rahrova,"Microwave Drying of Wood : Productivity Imrovement,"Waeas Transactions on the Heat and Mass Transfer
 Issue 4, Vol.1, Apr. 2006.

12-N. Amanifard, M. Borji and  A.K. Haghi, "Heat Transfer in Porous Media " , Brazilian Journal of Chemical Engineering ,  Jun. 2007.

13-N. Amanifard,N. Narimanzadeh, M. Borji, A. Khalkhali, and A. Habibdust",Modeling and Pareto optimization of Heat Transfer and Flow coefficients in Microchannels using GMDH type Neural Networks and Genetic Algorithms ," Energy Conversion  & Management, Volume 49, Issue 2, Feb. 2008, pp. 311-325.

14-N. Amanifard,B. Farhanieh and  K .Ghorbanian",Numerical Investigation of Rotating-Stall in a stage of an Axial Compressor with Two Different Approaches ," Journal of Aerospace Science and Technology(JAST),Vol.4,No.1,pp 1-9 ,  Mar. 2007.  

15-S.M .Hosseini and N. Amanifard " , Presenting a Modified SPH Algorithm for Numerical Studies of Fluid-Structure Interaction Problems "International Journal of Engineering, Transactions B: Applications,Vol.20,No.2,Aug. 2007,pp.167-178..

16-N. Amanifard and A.K. Haghi , " A Numerical study on drying of porous media " , Korean Journal of Chemical Engineering,Vol.25,No.2,pp 191-198,2008.

17-A.K. Haghi and N. Amanifard, “Analysis of heat and mass transfer during microwaves drying of food products”, Brazilian Journal of Chemical Eng.,Vol.25,No.3,July-Sep.2008,pp. 491-501.

18-N. Amanifard, M. Borji ans A.K. Haghi, “Numerical study of heat transfer and water flow velocities in microchannels with electrical double layers”, Theoretical Foundations of Chemical Eng.,2008,Vol.42,No.2,pp.211-215.

19-M. H. Farahani, N. Amanifard and S.M. Hosseini, “A fluid-structure interaction simulation by smoothed particle hydrodynamics”,Engineering Letters,Feb. 2008,EL_17_1_05.

20-R. Razaghi, N. Amanifard and N. Narimanzadeh, “Modeling and multi-objective optimization of stall control on NACA0015 airfoil with a synthetic jet using GMDH type neural networks and genetic algorithms” , International Journal of Engineering ,Vol.22,No.1,PP.69-88,Feb.2009.

21-N. Amanifard, N. Nariman-Zadeh,M.H. Frahani,A.Khalkhali, “ Modeling of multiple shortlength-scale stall cells in an axial compressor using evolved GMDH neural networks” , Energy conversion and Managements, Vol.49,2008,PP. 2588-2594.

22-M.H. Farahani, N. Amanifard, and S.M. Hosseini, “ A high-velocity Impact simulation using SPH- projection Method, International Journal of Engineering , Vol.22, No.4 ,Transactions  A: Basics, November 2009, pp. 359-368.

23-A. Bagheri, T. Karimi, N. Amanifard,"Tracking performance control of a cable communicated underwater vehicle using adaptive neural network controllers, Applied Soft Computing, Vol. 10, Issue 3, Jun. 2010, pp. 908-918. 

24-J. Javadi Moghaddam, M.H. Farahani, N. Amanifard, "A neural network-based sliding-mode control for rotating stall and surge in axial compressors" ,Applied Soft Computing, Vol.1, Issue 1, Jan. 2011, pp. 1036-1043.

25-Sahar Taslimi, Nima Amanifard, Kazem Atashkari," Aero-Thermodynamic Optimization of Turboprop engines using Multi-Objective Genetic Algorithms", International Journal of Engineering, Vol. 23, No.3&4,  Transactions A: Basics, Nov. 2010, pp. 253-266.

26-Vahab Haghighat, Nima Amanifard," A Modified Compressible Smoothed Particle Hydrodynamics (MCSPH) Method and its application on the numerical simulation of low and high velocity impacts",International Journal of Engineering,Vol.25, No.1, Jan. 2012,pp 45-57.

27-Mehdi Mahnama, Nima Amanifard, M.A. Lashteneshaei," Simulation of gravity wave propagation in free surface flows by an incompressible SPH algorithm", International Journal of Engineering,Vol.25,No.3,July2012,pp.237-244.

28-P.Ghalandari, N. Amanifard, K. Javaherdeh and A. Darvizeh, "Numerical Simulation of Squeezed Flow of a Viscoplastic Material by a Three-step Smoothed Particle Hydrodynamics Method",International Journal of Engineering, Vol.26,No.2,Apr. 2013, pp.561-570.

29-N. Amanifard, A.Hajiloo and N.Tohidi,"using neural networks and genetic algorithms for modelling and multi-objective optimal heat exchange through a tube bank", International Journal of Engineering, Vol.25, No.4, 2012, pp. 321-326. 

30-B. Hosseinpour, N. Amanifard and Ali Basti, "Simulation of Cold Rolling Process Using Smoothed Particle Hydrodynamics (SPH)", International Journal of Engineering , Vol.26, No.2,2013, pp.431-440. 

31-Vahab Haghat Namini, Nima Amanifard, A. darvizeh, K. Mohammadi, "Examining a modified Algorithm of Smoothe Particle Hydrodynamics for a high velocity perforation of an aluminium Beam," Meccanica, ,2013,DOI:10.1007/s11012-013-9692-0 

32-Hamed Mohaddes Deylami, Nima Amanifard, Farid Dolati, Ramin Kouhi Kamali, Kamran Mostajiri," Numerical Investigation of EHD Effects on the Airflow through corrugated channels" Journal of Mechanical Engineering Science, 2013,DOI:10.1177/0954406213478709. 

33-Hamed Mohaddes Deylami, Nima Amanifard, Farid Dolati, Ramin Kouhikamali, Kamran Mostajiri," Numerical Investigation of Using various Electrods Arrangements for Amplifying the EHD Enhanced Heat Transfer in a Smooth Channel", Journal of Electrostatics, 2013, DOI: 10.1016 j.elstat.2013.03.007  

34-Hamed Mohaddes Deylami, Nima Amanifard, Mehdi Sanaei, Ramin Kouhikamali," Numerical Investigation of Heat Transfer and pressure Drop in a Corrugated Channel", International Journal of Engineering, Vol. 26, No.7, PP. 811-820,2013. 

35-Pedram Mojtabavi, Nima Amanifard, H. M. Deylami," Flow Re-stabilizing Observation Via-air injection during the Rotating Stall through a single stage axial compressor by 2-D finite volume Approach",International Journal of Engineering, Vo.26,No.7, pp.801-810, 2013. 

36-Mohammad Naghshnejad, Nima Amanifard, H. M. Deylami “A predictive model based on a 3-D computational approach for film cooling effectiveness over a flat plate using GMDH-type neural networks", Heat and Mass Transfer, (DOI) 10.1007/s00231-013-1239-3, 2013. 

37-Naghashnejad, M., N. Amanifard, and H. M. Deylami. "A predictive model based on a 3-D computational approach for film cooling effectiveness over a flat plate using GMDH-type neural networks." Heat and Mass Transfer 50.1 (2014): 139-149. 

38-Payandehdoost M, Amanifard N, Naghashnejad M, Deylami HM. Robust model for predicting the average film cooling heat transfer coefficient over a turbine blade based on the finite volume study. Heat Transfer Research. 2014;45(7). 

39-S.S.  Hoseininezhad,  N.  Amanifard,  H.  Mohaddes  Deylami,  F.  Dolati,  Numerical  study  of  flow characteristics  around  a  NACA  4412  asymmetric  airfoil  under  the  influence  of electric field, Modares Mechanical Engineering,  Vol. 14, No. 5, pp. 147-154, 2014 (In Persian). 

40-K. Mostajiri Abid, N. Amanifard, H. Mohaddes Deylami, Numerical investigation of flow and temperature field on the backward-facing step affected by Electrohydrodynamic actuator, Modares Mechanical Engineering, Vol. 15, No. 3, pp. 231-238, 2015 (In Persian). 

41-K. Mostajiri Abid, N. Amanifard, H. Mohaddes Deylami, F. Dolati, Numerical Investigation of the Electric Field Effects on the Flow and Forced Convection Heat Transfer over a BackwardFacing Step, Journal of Solid and Fluid Mechanics, Vol. 5, No. 2, pp. 233-248, 2015 (In Persian). 

42-M. Sayar, N. Amanifard, and H. M. Deylami. "A meshless solution of electrodynamics equations for corona discharge using SPH." Journal of Electrostatics 81 (2016): 15-23. 

43-S. Ghorbani , N. Amanifard , H. M. Deylami, An Integral Solution for the Blasius Equation, Computational Research Progress in Applied Science & Engineering, Vol. 01(03), 93-102, August 2015. 

44-A. Rafi, N. Amanifard, H. Mohaddes Deylami, F. Dolati, Numerical investigation of the plasma actuator effects on the flow field and heat transfer coefficient in flat channel, Modares Mechanical Engineering, Vol. 15, No. 6, pp. 23-30, 2015 (In Persian).

45-S. Taghavi Fadaki1; N. Amanifard; H. Mohaddes Deylami; F. Dolati, Numerical investigation of collecting wire electrode effect on the flow field and heat transfer with electrohydrodynamic actuator, Journal of Solid and Fluid Mechanics, Vol. 6, No. 1, pp. 201-213, 2016 (In Persian). 

46-S. Dolati, N. Amanifard, M. A. Lashteh Neshaei, A. H. Hojati, Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method, Amirkabir Mechanical Engineering Journal, DOI: 10.22060/MEJ.2016.789, (In Persian, Accepted). 

47-S. Dolati, N. Amanifard, H. M. Deylami,  Numerical Investigation Of The Effect Of Plasma Actuator On The Film Cooling Effectiveness Over A Flat Plate Model, Amirkabir Mechanical Engineering Journal, DOI:  10.22060/mej.2016.716, (In Persian). 

48-S. Sh. Mousavi, N. Amanifard, H. M. Deylami, M. Naghashnejad, Numerical investigation of upstream ramp effects on the film cooling performance by cylindrical and fan-shaped hole, Amirkabir Mechanical Engineering Journal, (In Persian). 

49-A. Rosta, N. Amanifard, H. M. Deylami, F. Dolati, Experimental investigation of flow and heat transfer in a smooth channel affected by vortex generator with punched hole, Amirkabir Mechanical Engineering Journal, DOI: 10.22060/mej.2016.770, (In Persian). 

50-F. Dolati, N. Amanifard, H. Mohaddes Deylami, Kh. Yazdani, Numerical analysis of the electric field effect on mass transfer through a moist object, Modares Mechanical Engineering, Vol. 17, No. 1, pp. 383-393, 2017 (In Persian). 

51-Moayedi H, Amanifard N, Deylami HM, Dolati F. Numerical investigation of using micropolar fluid model for EHD flow through a smooth channel. Journal of Electrostatics. 2017 Jun 30;87:5163.  

52-Fadaki ST, Amanifard N, Deylami HM, Dolati F. Numerical analysis of the EHD driven flow with heat transfer in a smooth channel using multiple collectors. Heat and Mass Transfer. 2017 Feb:1-6. 

53-Habibi, N, Amanifard N, Deylami HM, Dolati F. Numerical Investigation of the Effect of Corona Discharge on the Heat Transfer and Pressure Drop over a Single Slot, Journal of Solid and Fluid Mechanics, Vol. 6, No. 4, pp. 205-221, 2017 (In Persian). 

54-Esmaeilzadeh A, Amanifard N, Deylami HM. Comparison of simple and curved trapezoidal longitudinal vortex generators for optimum flow characteristics and heat transfer augmentation in a heat exchanger. Applied Thermal Engineering. 2017 Oct 1;125:1414-25.  

55-Golsefid SS, Amanifard N, Deylami HM, Dolati F. Numerical and experimental study on EHD heat transfer enhancement with Joule heating effect through a rectangular enclosure. Applied Thermal Engineering. 2017 May 25. 

56-Dolati, Samera, Nima Amanifard, and Hamed Mohaddes Deylami. "Numerical study and GMDH-type neural networks modeling of plasma actuator effects on the film cooling over a flat plate." Applied Thermal Engineering (2017). 

57-K. Mostajiri Abid, N. Amanifard, H. Mohaddes Deylami, A correlation between two and three dimensional numerical investigation of heat transfer over a backward-facing step influenced by EHD flow, Heat Transfer Research. 2017. 

58-Deylami HM, Amanifard N, Hosseininezhad SS, Dolati F. Numerical investigation of the wake flow control past a circular cylinder with Electrohydrodynamic actuator. European Journal of Mechanics-B/Fluids. 2017 Jul 6, DOI: 10.1016/j.euromechflu.2017.06.002. 

59-Dolati F, Amanifard N, Deylami HM. Numerical investigation of moisture removal and energy consumption of porous body affected by EHD. Energy. 2018 Jul 1;154:352-64. 

60-Dolati F, Amanifard N, Mohaddes Deylami H. Numerical investigation of mass transfer enhancement through a porous body affected by electric field. Drying technology. 2018 Oct 3;36(13):1563-77. 

61- Kazemi, M., Amanifard, N, Mohaddes Deylami, H. Numerical Analysis of Located of Angle Sister Holes Effect on the Film Cooling Effectiveness. Iranian journal of mechanical engineering, 2018; 20(2): 129-152 (In Persian). 

62-Kadivar, A., Amanifard, N., Mohaddes Deylami, H. Numerical investigation of flow separation control in an axial compressor cascade by plasma actuation. Iranian journal of mechanical engineering, 2019; 20(4): 182-209 (In Persian). 

63-Dolati, S., Amanifard, N., Mohaddes Deylami, H. Numerical Investigation of the Effect of Plasma Actuator on the Film Cooling Effectiveness By Fan-Shaped Hole. Amirkabir Journal of Mechanical Engineering, 2019; 50(6): 1213-1228 (In Persian). 

64-Malmir-Chegini Y, Amanifard N. Heat transfer enhancement inside semi-insulated horizontal pipe by controlling the secondary flow of oil-based ferro-fluid in the presence of non-uniform magnetic field: a general correlation for the Nusselt number. Applied Thermal Engineering. 2019 May 27:113839. 

65-Moayedi H, Amanifard N, Deylami HM. Evaluation of using micropolar fluid approach for the EHD-enhanced forced convection through a rectangular channel using multiple electrode arrangements. Applied Thermal Engineering. 2019 May 29:113857. 
 
Conference Papers:

1-Nima Amanifard ,Kaveh Ghorbanian, Bijan Farhanieh”,Optimum Gap Size of a Cascade in AxialCompressors”First  International Conference of The Iranian Aerospace Society (Aero 2000),Dec. 30 2000- Jan. 1 ,2001,Sharif University of Technology, ,Tehran, Iran.

2- Nima Amanifard ,Kaveh Ghorbanian, Bijan Farhanieh”,Optimum Gap Size of a Cascade in AxialCompressors,”5th  International Mechanical Engineering Conference ,27-29, may 2001,Unversity of Guilan, Rasht ,Iran.

3-Bijan Farhanieh,Nima Amanifard”,Implementation of aTwo Layer Algebric Tubulence Model in a Finite Volume Solver for Compressible Turbomachinery Cascade Flows,”The 3th  Asian Congress of Fluid Mechanics,27- 31 May, 2002,IUT, Isfahan, Iran.

4-Bijan Farhanieh,Nima Amanifard”,Evaluation of High-Order Flux Splitting Method in 2-D Compressible Cascade Flows Using A Multi-Block Finite Volume Scheme,”6th International Mechanical Engineering Conference ,27-29, may 2002,Unversity of Khajehnasirtoosi, Tehran, Iran

5-Bijan farhanieh ,Nima Amanifard and Kaveh Ghorbanian“ ,Numerical investigations on Flow Instabilities in Axial Compressors ” , 4th  Conference for the Iranian Aerospace Society, Apr. 2003 , Amirkabir University, Tehran Iran.

6-Bijan Farhanieh, and Nima Amanifard”,Numerical investigation of rotating-stall in a stage of an axial compressor with two different geometric approaches ,”7th  International Mechanical Engineering Conference ,27-29, may 2003,University of Ferdosi, Mashad, Iran.

7-Nima Amanifard ,Bijan Farhanieh, and Kaveh Ghorbanian“ ,The effect of choosing the Number of Blades on Numerical Investigation of Rotating Stall Through a cascade of an axial Compressor,”2nd BSME-ASME
 International Conference on Thermal Engineering ,2-4 January 2004, Dhaka ,Bangladesh.

8- A. Darvizeh, M. Darvizeh ,N. Amanifard and A .Naraki“ ,Analysis of composite cylinders under electromagnetic pressure,”6th manufacturing engineering conference, 2003,University of Amirkabir, Tehran ,Iran.

9-Nima Amanifard ,M. Farshadmanesh and J. Taskini“ , Stall Vortex Shedding over a Compressor Cascade ,”8th International and 12th Annual Mech. Eng. Conference, May 2004 Tarbiat Modarres Univ., Tehran ,Iran.

10-N. Amanifard ,A. Arzpeyma, Y. Mojib, S. Azimi “ , Numerical Investigation of Flow and Temperature Fields in a set of Silicon Rectangular Micro-channels ,” 8 th International and 12th Annual Mech. Eng. Conference, May 2004, Tarbiat Modarres University, Tehran, Iran.

11-Nima Amanifard ,J. Taskini“ ,Rotating-Stall inception in axial compressor with Different Geometric Approaches ,” 8th International and 12th Annual Mech. Eng. Conference, May 2004 Tarbiat Modarres University, Tehran, Iran.

12- Nima Amanifard ,F. Jafarian, A. Kashani “ ,3-D Numerical observation of Turbulent Flow over a Single Rotor-Fan-Blade of a Turbofan engine in design point ,” 9th Fluid Dynamics conference, March 2005, Shiraz University, Shiraz, Iran.

13-Nima Amanifard and H. Mohafez “ , Numerical Comparison of LES And κ-ε models for flow over a cylinder ,” 9th International and 13th Annual Mech. Eng. Conference, May 2005 Isfahan University of Technology ,Isfahan, Iran.

14- Nima Amanifard ,R. Ansari, N. Narimanzadeh, R .Baradarnrazaz, A. Habibdust “ ,3-D Simulation of cooling process of Lamp in Exhaust instrument with GMDH Neural network ”.9th International and 13th Annual Mech. Eng. Conference,  May 2005 Isfahan University of Technology ,Isfahan, Iran.

15- P. Sedarati ,N. Amanifard ,N. Farzin “ ,Flow Analysis between two adjacent blades  of a centrifugal pump ,”9th International and 13th Annual Mech. Eng. Conference, May 2005 Isfahan University of Technology, Isfahan, Iran.

16-Nima Amanifard ,N. Narimanzadeh, A. Khalkhali, M .Farahani“ ,Application of Evolved GMDH Neural Networks Modeling to Mutliple Short length scale Stall Cells in an Axial compressor ,” ESM 2005 Conference, Oct.2005,Porto, Portugal.

17-Nima Amanifard and Saman Azimi ,“Numerical Investigation in Flow and Heat Transfer of Rectangular Microchannels ", The 14th Annual (International) Conference of Mechanical Engineering ,2006 (ISME 2006 ,Isfahan, Iran).

18- Nima Amanifard and Ramin Razzaghi ,“Numerical simulation of Flow Separation over an Airfoil with LES Turbulence Model”, The 14th Annual (International) Conference of Mechanical Engineering 2006, (ISME 2006), Isfahan, Iran.

19- A. Hajilu ,N. Amanifard ,and M. Farzaneh " ,Numerical Simulation of Flow in a Centrifugal Pump with sliding Mesh Technique " , The 14th Annual (International) Conference of Mechanical Engineering 2006 (ISME 2006 , Isfahan, Iran).

20-N. Amanifard,N .Narimanzadeh,A.Hajiloo,N.Tohidi, ”Modeling and optimal Heat transfer design of elliptical cross section pipes using genetic algorithm and multi-objective method .   The 15th Annual (International) Conference of Mechanical Engineering 2007(ISME 2007 , Tehran, Iran)

21-N. Amanifard,K.Atashkari,S.Taslimi, ”Modeling and Multi-objective Design of Turboprop engines with gentic algorithms ,   The 15th Annual International Conference of Mechanical Engineering 2007 (ISME 2007), Tehran , Iran .

22-N .Amanifard ,H.Deilami,"Numerical Investigation of air injection on a compressor map " , The 15th Annual (International) Conference of Mechanical Engineering 2007 Tehran, Iran   .

23-F. Zerafat Angiz ,N .Amanifard ,A.K. Haghi,"A Numerical Study on Moist Porous Solids ," WSEAS
Transactions on Heat Transfer, 2007.

24- N .Amanifard ,Mehdi Borgi, A.K. Haghi, " Heat Transfer and Fluid Flow in Microchannels - A theoretical approach ,"WSEAS Transactions on Heat Transfer, 2007.

25-S.M. Mahnama and N. Amanifard, “ Numerical simulation of Free surface waves by incompressible SPH algorithm”, 16th ISME 2008.

26-M.H. Frahani,N. Amanifard, H. Assadi, and M. Mahnama, “ Fluid-structure interaction simulation with free surface flows by SPH., ASME Int. Emch. Eng. Congress & Expositions, Oct.31 Nov.6,2008,Boston,Massachusetts.

27-M.H.Farahani, N. Amanifard, G. pouryoussefi, “ Numerical simulation of a pulsatory flow moving through flexible walls using SPH”, 7th WCE 2008,London,UK.(selected paper award)

28-N. Amanifard, and V. Haghighat, “Numerical Simulation of Low velocity impacts by using modified SPH Algorithm without artificial viscosity”, 17th ISME2009, Tehran,Iran.

29-N. Amanifard, and B. Zahed ,” Numerical investigation of destructive wave effects on beach structures” , 17th ISME 2009, Tehran, Iran.

30-N. Amanifard, H. Assadi, and M. Borji, “ A three step SPH algorithm for  elastic- plastic flows”, 17th ISME 2009, Tehran.Iran. 

31- N.Amanifard, Mohamad Hessan, Behnam Rahbar, “An SPH Approach for Fluid-Hypo-elastic Structure Interactions with Free Surfaces”, Proceeding of WCE2011, Vol.III, pp.22562261,London,UK.

32- N. Amanifard,Behnam Rahbar, Mohamad Hessan, “Numerical Simulation of the Mitral Valve Opening Using Smoothed Particle Hydrodynamics”, Proceeding of WCE2011, Vol.III, pp.23082312, London, UK.

33- P. Mojtabavi, N. Amanifard, H. M. Deylami, An Analysis of flow instability control through an axial compressor cascade by suction technique, 21th ISME 2013, Tehran, Iran.

34- H. M. Deylami, N. Amanifard, F. Dolati, R. Kouhikamali, Numerical investigation of Heat Transfer in the Channel Affected by Electrohydrodynamic Actuator, 21th ISME 2013, Tehran, Iran.

35-S.S. Hoseininezhad, N. Amanifard, H. M. Deylami, F. Dolati, Numerical study of vortexes control behind a cylinder under the influence of electrohydrodynamic actuator. 22th ISME 2014, Ahvaz, Iran.

36- F. Jafarian, N. Amanifard, H. M. Deylami, M. Naghashnezhad, Numerical investigation of upstream ramp effect on the adiabatic film cooling effectiveness, 22th ISME 2014, Ahvaz, Iran.

37- H. Lesani, N. Amanifard, H. M. Deylami, M. Sanaei, Numerical investigation of flow and heat transfer fields in the trapezoidal and triangular corrugated channels, 22th ISME 2014, Ahvaz, Iran.

38- K. Mostajiri, N. Amanifard, H. M. Deylami, F. Dolati, Three dimensional investigation of flow and heat transfer characteristics on a backward step affected by electric filed, 24th ISME 2016, Yazd, Iran.

39- N. Habibi, N. Amanifard, H. M. Deylami, F. Dolati, Numerical investigation of the effect of electric field on the heat transfer and power consumption in a slot, 24th ISME 2016, Yazd, Iran.

40- M. Sayar, N. Amanifard, H. M. Deylami, F. Dolati, Numerical investigation of the electrohydrodynamic phenomena equations with the hybrid of SPH and characteristics method, 24th ISME 2016, Yazd, Iran.

41- S. Dolati, N. Amanifard, H. M. Deylami, Numerical investigation of the effect of geometry parameters of injection channel in the presence of plasma actuator, 24th ISME 2016, Yazd, Iran.

42- Kh. Yazdani, N. Amanifard, H. M. Deylami, F. Dolati, Numerical investigation of the effect of an electric field on the mass transfer of moisture through a porous body in different thicknesses, 25th ISME 2017, Tehran, Iran.

43- K. Mirabi, N. Amanifard, H. M. Deylami, F. Dolati, Numerical analysis and determination of the pressure difference caused by the Electrohydrodynamic pump, 25th ISME 2017, Tehran, Iran.

44- L. Samaei, N. Amanifard, H. M. Deylami, F. Dolati, Numerical investigation of EHD-induced natural convection heat transfer through a rectangular enclosure using micropolar fluid model, 26th ISME 2018, Semnan, Iran.

45- A. Rafiei, N. Amanifard, H. M. Deylami, F. Dolati, Numerical investigation of forced convection heat transfer around a cylinder affected by EHD-induced flow, 26th ISME 2018, Semnan, Iran.

46- S. Miri, N. Amanifard, H. M. Deylami, F. Dolati, Numerical analysis and determination of the pressure difference caused by the Electrohydrodynamic pump, 27th ISME 2019, Tehran, Iran. 

47- M. Norzad, N. Amanifard, H. M. Deylami, F. Dolati, Numerical simulation of using plasma actuator for decreasing the drag force of heavy vehicles, 27th ISME 2019, Tehran, Iran.

48- B. Azizi, N. Amanifard, H. M. Deylami, F. Dolati, Numerical investigation of collector electrodes effect in a electrohydrodynamic pump and present a design model, 27th ISME 2019, Tehran, Iran.

49- H. Moayedi, N. Amanifard, H. M. Deylami, F. Dolati, Evaluation of micropolar model for analysis of flow field and heat transfer through a smooth channel affected by Electrohydrodynamic actuator, 27th ISME 2019, Tehran, Iran. 

Education

2003 - Ph.D.  Sharif University of Technology, Tehran, Iran School of Mechanical Engineering Advisors: Prof. Bijan Farhanieh, Prof. Kaveh Ghorbanian, and Prof. S.K. Hannani Major field: Computational Fluid Dynamics; Minor fields:  Turbomachinary, Applied Engineering Mathematics. Dissertation: “Numerical Investigation of Rotating-stall in An axial Compressor”

1994 - M.S.  Sharif University of Technology, Tehran, Iran School of Mechanical Engineering

1991 - B.S. University of Science & Technology, Tehran, Iran Faculty of Mechanical Engineering. 

HONORS AND AWARDS

Patents: 
A new Test room design for heating aluminum Radiators, tested and approved by Iranian Standard organization, financially supported by Iran radiator Industrial Group. 
Awards: 
2009  Selected researchers award of University of Guilan.

2008  Selected researchers award of  Guilan Province.
2008  Certificate of Merit for the 2008 international conference on engineering, Imperial College of London, UK. 2007 Selected Researchers award of University of Guilan.