BROCHURE
Dr.C.ELANCHEZHIAN is a Professor,Sri Sai Ram Engineering College, Anna University,India

Dr.C.ELANCHEZHIAN

Professor

Review Committee

India

Sri Sai Ram Engineering College, Anna University

Biography

Dr.C. Elanchezhian is currently Professor, Department of Mechanical Engineering, Sri Sai Ram Engineering College, Chennai. He obtained his Bachelor`s and Master`s degree in Production Engineering from Annamalai University and is pursuing Ph. D. from Anna University. He has more than 25 years of experience in teaching Manufacturing Allied Subjects. He has written 40 books in his area of specialization. He acted as a Session Chair in many International Conferences both in India and Abroad. He was awarded "Best Professor Award" Education Today Magazine. 12 Doctoral Students are currently pursuing their Research under his Supervision. He is a Reviewer for various Reputed Journals.

Publications

1. Vijaya Ramnath B., Elanchezhian C. and Kesavan R.,  “A Group decision making AHP model for optimizing assembly system through Lean Manufacturing”, International Journal of Management Research and Technology, Vol.3, No.1, pp.239-250,2009.
2. Vijaya Ramnath, B., Elanchezhian, C. and Kesavan, R. “Value Stream Mapping - A Tool For Implementing Lean Manufacturing For A Engine Assembly Line”, Impact Journal of Science and Technology, Vol. 4, No. 1, pp. 1-10, 2010. 
3. Vijaya Ramnath B., Elanchezhian C. and Kesavan R., “Suitability Assessment of Lean Kitting Assembly through Fuzzy based simulation model”, International Journal of Computer Applications, Vol.4,No.1, pp.25-31,2010. (Impact factor :0.814), (Indexed in google scholar) 
4. Vijaya Ramnath B., Elanchezhian C. and Kesavan R.,  “Application of Kanban system for implementing Lean Manufacturing (A case study)”, Journal of Engineering Research and Studies, Vol.1,Issue 1,pp.138-151,2010. (Indexed in google scholar). 
5. Vijaya Ramnath B., Elanchezhian C. and Kesavan R., “Optimal Batch size model for a constrained changeover time”, International Journal of Recent Trends in Engineering and Technology, Vol.3, No.5, pp.33-36, 2010.(Indexed in google scholar) 
6. Vijaya Ramnath B., Kesavan R and Elanchezhian C., “Selection of optimal assembly method using Multi-Dimensions Decision Making model”, Journal of Computing, Vol.2, Issue 9, pp.68 73, 2010. (Impact factor :0.21) 
7. Vijaya Ramnath B., Elanchezhian C. and Kesavan R., “Application of analytical hierarchy process to select Lean-Kitting assembly for an engine assembly”, AIMS International Journal of Management, Vol.4,No.2,pp.119-133,2010. 
8. C.Elanchezhian, BV Ramnath, R Kesavan,Vendor evaluation using multi criteria decision making , International Journal of Computer Applications 5 (9), 4-9 
9.Vijaya Ramnath B., Elanchezhian C. and Kesavan R., “Application of Integer Programming Model for Optimization design facility using Lean Manufacturing ( A case study)”, International Journal of Reliability Quality and Operations Management, Vol.1, No.1-2, pp.95-107,2010. 
10. C Elanchezhian, B Vijaya Ramnath, R Kesavan , Vendor selection using analytical hierarchy process in supply chain management, , J Engg Res Studies 1 (1), 118-127. 
11. Vijaya Ramnath B., Elanchezhian C. and Kesavan R., “A multi attribute decision making method for selection of optimal assembly line”, Management Science Letters, Vol.1, pp.65 72, 2011. 
12. Vijaya Ramnath B., Elanchezhian C. and Kesavan R., “Reverse engineering system for generator engine parts”, International Journal of Collaborative Enterprise, (Inderscience publication) Vol.2, No.2/3,pp.113-128,2011. (Indexed in google scholar) 
13.C. Elanchezhian,  B. Vijaya Ramnath, Niranjan Raja R., S. Junaid Kokan, R. Sathya Narayanan, “Design of a Machine to determine Coefficient of Friction and Stiffness of Web Media “, International Review of Mechanical Engineering. Vol. 6 No. 7, pp. 1515-1520. (Impact factor :6.46). 
14.B.Vijaya Ramnath, R. Niranjan raja, S. Junaid Kokan, R. Sathya Narayanan, S. Rajesh, and C Elanchezhian, “Properties and Performance Analysis of Woven Roving Composite Laminates for Automotive Panel Board Applications” Advanced Material Research, Vol.683, 2013, pp21-24. (Impact factor :0.158).
15.B.Vijaya Ramnath, C Vinodh Krishna, S Karthik, K Saravanan, V.M. Manickavasagam and C.Elanchezhian “Evaluation of the Flexural Properties of Pineapple Reinforced Polymer Composite for Automotive and Electrical Applications”, Advanced Material Research, Vol.893-720,2014, pp 271-274 (Impact factor :0.158). 
16.C.Elanchezhian, B.Vijaya Ramnath ,Praveen Kumar.K, Saikeerthi.S.P, M.Sathish kumar, ’Determination Of Mechanical Properties Of Notched Weft Knitted Glass Fiber In Variable Thickness Composites’, International Journal Applied Mechanics and Materials, Volume 591, June 2014, Pages 124-127. (Impact factor: 0.4). 
17.N.Arun kumar     C. Elanchezhian, B.Vijaya ramnath, “ Investigation of Process Parameters of Friction Stir Welded AA7075 Aluminium Alloys”, International Journal of Engineering Research, Volume 1,  2014, Pages 148-150. 
18. Praveen Kumar K, C. Elanchezhian, B. Vijayaramnath, “Estimation of Physical, Mechanical, Morphological and Water Absorption Properties of Wood Flour Filled Polypropylene Composite”, International Journal of Engineering Research, Volume 3, 2014, 
19. Saikeerthi.S.P, Vijayaramnath.B, Elanchezhian.C, “  Experimental Evaluation of The Mechanical Properties Of Aluminium 6061- B4c-Sic Composite”, International Journal of Engineering Research, Volume 3, 2014, Pages 70-73. 
20. B. Vijaya Ramnath, Rajesh S , C. Elanchezhian , V. Vignesh, V. Vijai Rahul, V.Tamilselvan , S.U. Sathya Narayanan  ‘ Investigation of Mechanical behaviour of Glass fibre based SiC polymer composites’, International Journal Applied Mechanics and Materials, Volume 591, June 2014, Pages 142-145. (Impact factor: 0.4). 
21. V.M.Manickavasagam, B Vijaya Ramnath,    C Elanchezhian , J Jenish S.Jayavel V.Muthukumar, ‘Investigation on impact and compression Properties of Pineapple Reinforced Polymer Composite’,  International Journal Applied Mechanics and Materials, Volume 591, June 2014, Pages 116-119. (Impact factor: 0.4). 
22. B.Vijaya Ramnath.B, Vishal chandrasekar, C.Elanchezhian K.Venkataraman,  Vinoth Selva Bruce L, ‘Value stream evaluation and simulation to improve material flow and productivity’, International Journal Applied Mechanics and Materials, Volume 612,  2014, Pages 89-95. (Impact factor: 0.4). 
23. B.Vijaya Ramnath, C. Parswajinan, C. Elanchezhian, S. V. Pragadeesh, P. R. Ramkishore, V. Sabarish, ‘A Review on CNT Reinforced Aluminium and Magnesium Matrix Composites’, International Journal Applied Mechanics and Materials, Volume 591, June 2014, Pages 120 123. (Impact factor: 0.4). 
24. B.Vijaya Ramnath, V.Santhosh Kumar, P.V.Nirmal, S.Karthick, G.Prem Kumar, C. Elanchezhian , S.Rajesh , K.Suresh ,  :Experimental Investigation of Mechanical behavior of Jute-Flax based Glass Fiber reinforced composite”, Fibers and polymers, Volume 15, Pages 1251-1262,2014. (Impact factor: 1.112). 
25. C Parswajinan, BV Ramnath, C Elanchezhian, SV Pragadeesh Investigation on Mechanical Properties of Nano Ferrous Composite , Procedia Engineering 97, 513-521 
26. C.Elanchezhian,B.Vijaya Ramnath, J.Hemalatha, ”Mechanical Behaviour of  Glass and Carbon Fibre Reinforced Composites at Varying Strain Rates and Temperature”, International Journal Procedia Material Science, Volume 6, Pages 1405-1418,2014. 
27. B.Vijaya Ramnath, C.Elanchezhian, Vishal Chandrasekhar, A. Arun Kumar, S. Mohamed Asif, G.Riyaz Mohamed, D. Vinodh Raj ,C .Suresh Kumar,” Analysis and Optimization of Gating System for   Commutator End Bracket”, International Journal Procedia Material Science, Volume 6, Pages 1312-1328,2014. 
28. K.Venkataraman, B.Vijaya Ramnath , V.Muthu Kumar , C.Elanchezhian, ”Application of valve steam mapping for reduction of cycle time in a machining process”, International Journal Procedia Material Science, Volume 6, Pages 1187-1196, 2014. 
29. B.Vijaya Ramnath, C. Elanchezhian, RM. Annamalai, S.Aravind, T. Sri Ananda Atreya,  V. Vignesh, C.Subramanian, “Aluminium metal matrix composites – a review”, Reviews on advanced material science, Volume 38, October 2013, Pages 55-60. (Impact factor: 1.017). 
30. B.Vijaya Ramnath, R. Niranjan Raja, S. Junaid Kokan, R. Sathya Narayanan, A.R.Rajendra Prasad, C.Elanchezhian and V.M.Manickavasagam, “Evaluation of mechanical properties of abaca–jute–glass fibre reinforced epoxy composite”, Materials and design, Volume 51, October 2013, Pages 357-366. (Impact factor: 3.2). 
31. B.Vijaya Ramnath, C. Elanchezhian, M.Jaivignesh, S. Rajesh, C. Parswajinan, A. Siddique Ahmed Ghias, “Evaluation of Mechanical Properties of Aluminium Alloy-Alumina Boron Carbide Metal Matrix Composites”, Materials and design, Volume 58, June  2014, Pages 332-338. (Impact factor: 3.2). 

32. B Vijaya Ramnath, V.M.Manickavasagam, C Elanchezhian, C Vinodh Krishna, S Karthik, K Saravanan “Determination of mechanical properties of intra-layer abaca–jute–glass fiber reinforced composite ”, Materials and Design, Volume 60, August  2014, Pages 643-652. (Impact factor: 3.2). 
33. B. Vijaya Ramnath,  V.M. Manickavasagam, C. Elanchezhian, A. Santhosh Shankar, R. Sundarrajan,  S. Vickneshwaran,  S. Pithchai Pandian, ‘ Investigation on Flexural and Impact Properties of Abaca and Manila Hybrid Composite’, International Journal Applied Mechanics  and  Materials,  Volume 1051,  July 2014, Page 102-106. (Impact factor: 0.4). 
34.  V.M. Manickavasagam,  B. Vijaya Ramnath,   C.Elanchezhian,  V. Vignesh ,V. Vijai Rahul S.U. Sathya Narayanan, V.Tamilselvan, ‘ Investigation on Compression and Hardness Properties of Abaca and Manila Hybrid Composite ’,  International Journal Applied  Mechanics  and  Materials,  Volume 680,  July 2014, Page   23-26. (Impact factor: 0.4)
35. B. Vijaya Ramnath,  C . Parswajinan,  C. Elanchezhian, S. V. Pragadeesh, C. Kavin,P. , R. Ramkishore, V. Sabarish, ‘Experimental Investigation of Compression and Chemical Properties of   Aluminium Nano Composite’, International Journal  Applied  Mechanics  and Materials,  Volume 680,  July 2014, Page  7-10. (Impact factor: 0.4). 
36. C.Elanchezhian, B.Vijaya Ramnath, K.Pazhanivel, A.Vedhapuri, B.Mano, A.Manojkumar, M.Stalin, V.Vishnu , ‘Comparative study and analysis of friction stir welding with plasma arc welding’, International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 695-700. (Impact factor: 0.4). 
37. C.Elanchezhian, B.Vijaya Ramnath, R.Saisundararam, V.Ramanan, C.S.Siddarth, P.Kandeepa thondaiman, V.Maurya sundar, S.M.Mohammed sadiq, , ‘Investigating the weld strength of AA7075 aluminium alloy for TIG, MIG and FSW welding’, International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 727-732. (Impact factor: 0.4). 

38. Vijaya Ramnath B, Manickavasagam V.M, Elanchezhian C, Kavin C, Karthik Subramanian B, Rahul V  , ‘Investigation of Tensile Properties of Manila Fibre Reinforced Composite’, International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 96-99. (Impact factor: 0.4). 
39. Manickavasagam V.M , Vijaya Ramnath B., Elanchezhian C., Sundarrajan R., Vickneshwaran S., Santhosh Shankar A., Kaosik R ., Santhosh Kumar K. , ‘Evaluation of the double shear and hardness properties of abaca and flax reinforced polymer composite for automotive applications’, International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 85-89. (Impact factor: 0.4). 
40. Manickavasagam V.M, Vijaya Ramnath B, Elanchezhian C, Ramakrishnan G  S.Sathish, L.R. Prasanna Venkatesh, S. Pithchai Pandian, ‘Investigation Of Tensile Behaviour Of Flax –Abaca Hybrid Epoxy Composite’, International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages 140-143. (Impact factor: 0.4). 
41. B.Vijaya Ramnath, R. Sharavanan, M. Chandrasekaran, C. Elanchezhian, R. Sathyanarayanan, R. Niranjan Raja, and S. Junaid Kokan, “Experimental Determination of Mechanical Properties of Banana Jute Hybrid Composite”, Fibers and polymers, Volume 16, Pages 164-172, 2015. (Impact factor: 1.112). 
43.   C. Elanchezhian, B. Vijaya Ramnath, M. U. Sughan, K. Suseetharan V. Varun Kumar, R. Vezhavendan and R.Kaosik “Evaluation of mechanical properties of human hairbombyx mori silk fiber reinforced epoxy based biocomposite “ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015,5498- 5505. (Impact factor: 0.7). 
44. C. Elanchezhian, B. Vijaya Ramnath, Kaosik R., Nellaiappan T. K., Santhosh Kumar K., Kavirajan P. and Sughan m. u. “Evaluation of mechanical properties of kenaf  based   hybrid composite for automotive components replacement”  ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13,  2015, 5518- 5523. (Impact factor: 0.7). 
45. Vijaya Ramnath B , Manickavasagam V. M. , Elanchezhian C. , Karthick R., Bharath U., Maruthi Kishore R. A. and Rahul R. “investigation of tensile and impact behaviour of abaca-raffia hybrid composite” ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015,5577-5580. (Impact factor: 0.7). 
46.  B.Vijaya Ramnath , C.Elanchezhian, D.Keshavan. K. Ashok Kumar, “Prediction of tensile behavior of polymer composite golf shaft”, Volume 4, Issue 2, Part A, 2017, Pages 3356–3360, Elsevier – Materials Today selected from ICMPC16. 
47.  B.Vijaya Ramnath , C. Elanchezhian, M. Deepak,  Arvind Narayan,” Investigation of torsional behavior of polymer composite golf shaft”, Volume 4, Issue 2, Part A, 2017, Pages 3342–3345, Elsevier – Materials Today selected from ICMPC16. 

48.  S. Rajesh, B. Vijaya Ramnath, C.Elanchezhian, V.Sudharsanan, “Investigation of flexural response of kevlar composites”, Indian Journal of Science and Technology, Vol. 9,S(1), 2016 selected from ICMMMS’16. 
49. Jeykrishnan Janardhanan, B. Vijaya Ramnath, C Elanchezian, “Optimization of process parameters on EN24 tool steel using Taguchi technique in Electro Discharge Machining”, IOP Conf. Series: Materials Science and Engineering 149 (2016) 012022, PP.1 to 11. 
50. J. Jeykrishnan, Dr. B. Vijaya Ramnath, Dr. C. Elanchezhian, S. Akilesh, “Parametric analysis on Electro-chemical machining of SKD-12 tool steel”,  Volume 4, Issue 2, Part A, 2017, Pages 3760–3766,  Elsevier – Materials Today selected from ICMPC16. 
51. J. Jeykrishnan, Dr. B. Vijaya Ramnath, Dr. C. Elanchezhian, S. Akilesh, “Optimization of process parameters in Electro-chemical machining (ECM) of D3 die steels using Taguchi technique”,  Materials Today: Proceedings 4 (8), 7884 – 7891, 2017 – Materials Today Proceedings selected from ICAAMM16 organised by MLR, Hydrabed. 
52. Vijaya Ramnath. B, Jeykrishnan. J, Elanchezhian. C, Ashok Kumar, Arvind Narayan, “Investigation of flexural behaviour of polymer composite golf shaft”, Materials Today: Proceedings 4 (8), 9341-9345, 2017 – Materials Today Proceedings selected from ICAAMM16 organised by MLR, Hydrabed.  
53. Vijaya Ramnath. B, Jeykrishnan. J, Elanchezhian. C, “Investigation of Shear behaviour of polymer composite golf shaft”, Materials Today: Proceedings 4 (8), 9218-9223– Materials Today Proceedings selected from ICAAMM16 organised by MLR, Hydrabed.  
54.  B. Vijaya Ramnath , C. Elanchezhian , S. Rajesh , S. Jaya Prakash , B. Manoj Kumaar , K. Rajeshkannan, “Design and Development of Milling Fixture for Friction Stir Welding”. Materials Today Proceedings, 5(1),PP.1832-1838, selected from PMME-2016, Paper ID: EMT-440.  
55. C. Elanchezhian, B. VijayaRamnath, G. Ramakrishnan, M. Rajendrakumar, V.Naveenkumar, M. K. Saravanakumar, “Review on mechanical properties of natural fiber composites”. Accepted for publication in Elsevier – Materials Today Proceedings selected from PMME-2016, Paper ID: EMT-443. 
56. C.Elanchezhian, B.Vijaya Ramnath, K.N.SripadaRaghavendra, MithunMuralidharan, G.Rekha, “Design and Comparison of the Strength and Efficiency of Drive Shaft made of Steel and Composite Materials”. Accepted for publication in Elsevier – Materials Today Proceedings, 5(1),PP.1000-1007,  selected from PMME-2016, Paper ID: EMT-386. 
57. C.Elanchezhian, B.VijayaRamnath, G.Ramakrishnan, K.N.SripadaRaghavendra, MithunMuralidharan, V.Kishore, “Review on metal matrix composites for marine applications”. Accepted for publication in Elsevier – Materials Today Proceedings, 5(1),PP.1211-1218,  selected from PMME-2016, Paper ID: EMT-384. 
58. S. Rajesh, B. VijayaRamnath, C.Elanchezhian, M. Abhijith, R. Dinesh Riju, K. KathirKishan, “Investigation of Tensile Behavior of Kevlar Composite”. Accepted for publication in Elsevier – Materials Today Proceedings, 5(1),PP.1156-1161, selected from PMME-2016,Paper ID: EMT-382. 
59. B.VijayaRamnath, C.Elanchezhian, E.Naveen, G.Rekha, M.Vidhyarajan, M.Manivannan, J.Dhanush, “Implementation of Concurrent Redesign & Manufacture procedure for an automotive component”. Accepted for publication in  Elsevier – Materials Today Proceedings selected from PMME-2016,Paper ID: EMT-387. 
60. S. Rajesh, B. VijayaRamnath, C.Elanchezhian, AkashChowdhury, R. AshwinSathya, K.R. Deepak, “Review on Testing of Polymer Fasteners”. Accepted for publication in Elsevier – Materials Today Proceedings, 5(1),PP.1817-1823, selected from PMME 2016,Paper ID: EMT-441. 
61. B. VijayaRamnath, C.Elanchezhian, J. Jeykrishnan, R. Ragavendar, P.K. Rakesh, J. SujayDhamodar, A.Danasekar, “Implementation of Reverse Engineering for Crankshaft Manufacturing Industry”. Accepted for publication in  Elsevier – Materials Today Proceedings, 5(1),PP.994-999, 2018, selected from PMME-2016,Paper ID: EMT-385. 
62. E. Naveen , B. Vijaya Ramnath , C. Elanchezhian , S.S. Mohamed Nazirudeen, “Influence of organic corrosion inhibitors on pickling corrosion behaviour of sinter-forged C45 steel and 2% Cu alloyed C45 steel”, Journal of Alloys and Compounds 695 (2017) 3299 to 3309  (Impact factor: 3.014). 
63. K.S. Suresh Kumar, Dr.C. Elanchezhian and Dr.B. Vijaya Ramnath: “Wind Effects Of An Upstream Building On A Low-Rise Building” ”- Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
64. Siddique Ahmed Ghias, Vijaya Ramanath.B, Elanchezhian.C, Siddhartha Devarajan and Ramanan Nandagopan: “Wear analysis of Sintered Al-B4 Cp Composite Material”- Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
65. Sri Murugan, Vijaya Ramnath.B, Elanchezhian.C and Ramanan Nandagopan: “Analysis of Mechanical and Metallurgical Properties Of PMC Gear Material” ”- Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
66. S.Rajesh, B.Vijaya Ramnath, C.Elanchezhian and S.Vivek : “Experimental Investigation of Tensile and Impact Behavior of Aramid-Natural Fiber Composite” ”- Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
67. Siddique Ghias Ahmed, B.Vijaya Ramnath, C.Elanchezhian, D.Siddhartha and Ramanan Nandagopan: “Analysis of The Friction Welding Mechanism Of Low Carbon Steel –Stainless Steel And Aluminium – Copper”- ”- Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
68. B Janarthanan, C Elanchezhian, Dr.G.B. Bhaskar, N Ramkumar and B Vijaya Ramnath: “Relationship between Fracture Toughness and Specimen Thickness for Quasi-isotropic Titanium/Epoxy Laminates”- Accepted for publication in Materials Today Proceedings Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
69. C Elanchezhian, B Vijaya Ramanth, Dr.G.B. Bhaskar and M Vivekanandhan: “An Investigation of the Mechanical Properties of Hybrid Composites in Applications of Automotive Industry” - Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
70. N Thinakaran, C. Elanchezhian, B Vijaya Ramnath and J Jayaprakash: “Optimization of Total Cost in Inventory Routing Problem with Homogenous type of Vehicles using Metaheuristic algorithm – A Review” - Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
71. B Vijaya Ramnath, C. Elanchezhian, V.M. Manickavasagam, R Surya Narayanan, R Sudharshan and G Pugazhendhi: “a review on sandwich composites and their advancements” - Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17 (Impact Factor: 0.53) 
72. A Raja, C. Elanchezhian and B. Vijaya Ramnath: “An Integrated Approach in Selecting Best Supplier Selection Process in Supply Chain Management Using MAT LAB-A Review” - Accepted for publication in Materials Today Proceedings-Elsevier Publications selected form ICAMMAS17- SIT (Impact Factor: 0.53) 
73. Rajesh S, Vijaya Ramnath B, Elanchezhian C, Jeykrishnan J, Jayanthi Nathan S and Karthik M.R. “Optimization of Machining Parameters of Aramid Natural Hybrid Composite in Abrasive Water Jet Machining using Taguchi Method”, Advanced Science, Engineering and Medicine Volume 10 , 2018, Pages 1-4,  selected from ICMME 2017-SCSVMV Uty. 

Education

  • Ph.D- Anna University, Chennai- 2011
  • M.E- Annamalai University, Chidambaram- 1999
  • B.E- Annamalai University, Chidambaram- 1993

RESEARCH AND INTEREST

Manufacturing Technology, Materials Science & Engineering and Industrial Engineering

HONORS AND AWARDS

  • Resource Person for  “AICTE sponsored two weeks FACULTY DEVELOPMENT PROGRAMME on “Bio degradable, Green and Nano composites for industrial Applications: Manufacturing Methodologies and Properties” 
  • National Advisory Committee Member for Recent Innovations in Production Engineering-2017(RIPE-2017)- Madras Institute of Technology, Chennai-44. March 24th & 25th , 2017 
  • Session Chair and Organizing Secretary for International Conference on Mechanical, Materials and Manufacturing Systems-2016 (ICMMMS-2016) Sri Sairam Engineering College, Chennai-44. 
    27th& 28th January, 2016 
  • Rajiv Gandhi Gold Medal Award Global Economic progress & Research Association 
    Held on 20th August,2015 at Bengaluru 
  • Chairperson for First International Conference on Advances in Materials & Manufacturing Engineering-2014 (ICAMME-14) Sri Sairam Group of Institutions, Chennai-44 19th & 20th December,2014
  • Best Case Study Award 55th National Convention of Indian Institution of Industrial Engineering & International Conference Held at Shri Ramdeobaba College of Engineering & Management, Nagpur on 26th October,2013 Sri Sairam Institute of Technology, Chennai-44. 20/10/2017 to 02/11/2017.
  • Session Chair & Organizing Secretary for the International Conference on Advances in Materials, Manufacturing and Applied Sciences-2017 (ICAMMAS-17) Sri Sairam Institute of Technology, Chennai-44. 30th & 31st March,2017 
  • Best Professor Award Awarded by Education Today Magazine 13th November,2013

COLLOABORATIONS

NA

EditorShip

Has written more than 40 Books for the subjects in Mechanical engineering